Viewing The Recording On The Tv Screen - Sony DCR-IP5E/IP7E Operating Instructions Manual

Viewing the recording
on the TV screen
Connect your camcorder to your TV with the A/
V connecting cable supplied with your
camcorder to watch the playback picture on the
TV screen. You can operate the video control
buttons in the same way as when you monitor
playback pictures on the camcorder screen. When
monitoring the playback picture on the TV
screen, we recommend that you power your
camcorder from the mains using the AC power
adaptor (p. 30). Also, refer to the operating
instructions of your TV.
Open the jack cover. Connect your camcorder to
the TV using the A/V connecting cable. Then, set
the TV/VCR selector on the TV to VCR.
The supplied A/V connecting cable is equipped
with an S video plug and a video plug. Use either
the S video plug or the video plug depending on
the TV. Do not connect both of the plugs to the
TV.
A/V
: Signal flow/
If your TV is already connected
to a VCR
Connect your camcorder to the LINE IN input on
the VCR using the A/V connecting cable
supplied with your camcorder. Set the input
selector on the VCR to LINE.
Yellow/
Black/
White/
Red/
S VIDEO or VIDEO/
IN
S VIDEO
VIDEO
AUDIO
59