Playing Back A Tape With Digital Effects - Sony DCR-IP5E/IP7E Operating Instructions Manual

Playing back a tape
with digital effects
During playback, you can process a scene using
the digital effect function: STILL, FLASH, LUMI.,
and TRAIL.
(1) In playback or playback pause mode, select
FN, then press the centre z on the control
button. The PAGE1 screen appears.
(2) Select PAGE2, then press the centre z on the
control button. The PAGE2 screen appears.
(3) Select DIG EFFT, then press the centre z on
the control button. The DIG EFFT screen used
for selecting the desired digital effect mode
appears.
(4) Select the desired digital effect mode, then
press the centre z on the control button.
In STILL or LUMI. mode, when the mode is
selected, the picture being displayed is stored
in memory as a still image.
(5) Select –/+, then press the centre z on the
control button repeatedly to adjust the effect.
See page 71 for details on each digital effect
mode.
(6) Press DISPLAY to turn off the screen buttons.
Pressing DISPLAY again displays the video
control buttons.
1
FN
86
(1)
(2)
(3)
(4)
(5)
(6)
2
PAGE2
z
z
z
3–5
DIG
DIG EFFT
EFFT
6
z
z
OFF OK
STILL FLASH LUMI. TRAIL