Recording a picture
To return to the FN screen
Select
OK, then press the centre z on the
z
control button after step 4. The PAGE2 screen
appears. Next, select EXIT, then press the centre
z on the control button.
z
When FN is not displayed on the screen
Press DISPLAY or z so that FN is displayed. You
can also use DISPLAY on the Remote
z
Commander.
The colour of the LCD screen
You can adjust it using the LCD COLOUR item
in the menu settings (p. 124).
Even if you adjust the screen using LCD BRT,
LCD COLOUR, or the LCD screen backlight
The recorded picture will not be affected.
The setting of the LCD BACKLIGHT switch
Normally, set it to ON. When you use the
camcorder in bright conditions using the battery
pack, set it to OFF. This position saves battery
power.
Adjusting the viewfinder
If you record pictures with the LCD panel closed,
check the picture with the viewfinder. Adjust the
viewfinder lens to your eyesight so that the
indicators in the viewfinder come into sharp
focus.
Pull out the viewfinder and move the viewfinder
lens adjustment lever.
43