Table of Contents
Advertisement
Recording a programme
When you have finished dubbing the
tape
Select
, then press the centre z on the control
button and stop the playback of the player.
Notes
•When an incompatible picture (such as one
recorded with the DV format) is input, the
message "INPUT ERROR" appears.
•You can connect only one recorder using the
i.LINK cable.
When you dub a picture in digital form
The colour of the display may be uneven.
However, this does not affect the dubbed picture.
If you record a playback pause picture with
the i.LINK (MICROMV) jack
The recorded picture becomes rough. And when
you play back the picture using your camcorder,
the picture may jitter.
Note
First, start playback or turn to the playback pause
mode before the camcorder starts recording or
turns to the recording pause mode. If no signal is
input into the camcorder, the message "NO
INPUT" appears and the camcorder cannot start
recording.
Before recording
Make sure the MPEG IN indicator appears on the
screen. The MPEG IN indicator may appear on
both pieces of equipment.
z
107
Hide quick links:
Advertisement
Table of Contents
