OneX Overview
Table 2
Fiber-Optic Port Cabling Specifications
SFP Module
1000BASE-LX/LH
1000BASE-ZX
1000BASE-BX
Coarse Wave Division
Multiplexing (CWDM)
Dense Wave Division
Multiplexing (DWDM)
1. A mode-conditioning patch cord is required.
2. ITU-T G.652 SMF as specified by the IEEE 802.3z standard.
3. 1000BASE-ZX modules can send data up to 62 miles (100 km) by using dispersion-shifted SMF or low-attenuation SMF; the
distance depends on the fiber quality, the number of splices, and the connectors.
OneX Overview
Installation Notes for the Cisco TwinGig and OneX Converter Modules
4
Wavelength
Fiber
(nanometers)
Type
1300
MMF
SMF
1550
SMF
1490/1310
SMF
1470, 1490,
SMF
1510, 1530,
1550, 1570,
1590, 1610
100GHz ITU
SMF
channels 20
to 59
The Cisco OneX Converter Module (model CVR-X2-SFP10G),also known as a
converter module, is a hot-swappable input/output (I/O) device that slides into a
10-Gigabit Ethernet X2 slot on a switch. It converts the 10-Gigabit X2 interface
into a single 10-Gigabit SFP+ interface. It is supported on many platforms using
X2 interfaces. This converter module is shown in
Core Size
(micron)
1
62.5
50
50
2
G.652
2
G.652
2
G.652
2
G.652
2
G.652
Modal
Bandwidth
(MHz/km)
Cable Distance
500
1804 feet (550 m)
400
1804 feet (550 m)
500
1804 feet (550 m)
—
32,810 feet (10 km
—
43.4 to 62 miles (70
to 100 km)
—
32,810 feet (10 km)
—
62 miles (100 km)
—
62 miles (100 km)
Figure
2.
3
78-17572-04