Mitsubishi Electric FR-A7AR Instruction Manual page 23

REMARKS
• Information on crimp terminals
Commercially available product examples (as of Jan. 2017)
Wire gauge
Terminal
screw size
(mm
0.3
M3 0.5
0.75
Crimping tool model No.: CRIMPFOX 6 (Phoenix Contact Co., Ltd.)
Insert wires to a blade terminal, and check that the wires come out for about 0 to 0.5 mm from a sleeve.
Check the condition of the blade terminal after crimping. Do not use a blade terminal of which the crimping is
inappropriate, or the face is damaged.
(2) Loosen the terminal screw and insert the cable into the terminal.
Screw size Tightening torque
M3
CAUTION
• Undertightening can cause cable disconnection or malfunction. Overtightening can cause a short circuit or
malfunction due to damage to the screw or unit.
INSTALLATION AND WIRING (FR-E700 SERIES (E kit))
2
With insulation sleeve
)
AI 0,34-6TQ
Al 0,5-6WH
Al 0,75-6GY
0.5Nm to 0.6Nm
0.3mm
Ferrule part No.
Without insulation sleeve
A 0,34-7
A 0,5-6
A 0,75-6
Damaged Crumpled tip
Wire gauge
2 2
to 0.75mm
(Tip thickness: 0.4mm/tip width: 2.5mm )
Maker
Phoenix Contact
Co.,Ltd.
Unstranded
wires
Wires are not inserted
into the sleeve
Screwdriver
Small flat-blade screwdriver
3
18