INSTALLATION AND WIRING (FR-E700 SERIES (E kit))
For FR-E720-5.5K (FR-E720-240) or more, FR-E740-11K (FR-E740-230) or more
(1) Remove the front cover 1 and 2 from the inverter. (For removing the front cover, refer to the FR-E700
series instruction manual.)
(2) Remove the PU cover from the front cover 2. For removing the PU cover, refer to page 12.
(3) Cut off the dummy cover of the front cover 1 with a nipper, etc. and make a space for installing the
option small cover.
Cut off the edges so that no burr is left.
• Because voltage is stated on the PU cover, replace a PU cover of a plug-in option front cover with the removed PU
cover from the inverter.
Front cover 1
Front cover 2