Operating Instructions - ADJ StarTec Series User Instructions

Contour

Operating Instructions

System Menu & Display Lock: When making adjustments press ENTER to confirm your setup
then press and hold the MENU button for at least 3 seconds. To exit without making any
adjustments press the MENU button. The display will lock after 30 seconds, press the MENU
button for 3 seconds to unlock.
DMX ADDRESS SETTING -
.
Select your desired DMX address
1. Press the MENU button until "Addr" is displayed, and press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find
your desired address. Press ENTER to set your desired DMX address.
DMX CHANNEL MODE -
Select your desired DMX channel mode.
1. Press the MENU button until "Chnd" is displayed, and press ENTER. The current DMX channel
mode will now be displayed.
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to
confim and exit.
-
SHOW MODE
Show modes 1-15 (Factory programs). Show mode can run with or without
sound active mode active.
1. Press the MENU button until "Shnd" is displayed, and press ENTER.
2. "Sh X" will now be displayed, "X" representing a number between 0-4. Shows 1-4 are factory pro-
grams, while show "0" is random mode. Use the UP or DOWN buttons to find your desired show.
3. When you have found your desired show press ENTER, then press and hold the MENU button for
at least 3 seconds to activate. After you have set your desired show, it can be changed at any time
using the UP or DOWN buttons.
-
MASTER-SLAVE SETUP
Set up master/slave configuration.
1. Press the MENU button until "SLnd" is displayed, and press ENTER. Either "MASt" or "SL 1" will
be displayed.
2. Press the UP or DOWN buttons until your desired setting is displayed, press ENTER to confim.
ADJ Products, LLC - www.adj.com - Contour User Manual Page 11