Installing The Rru On A Pole; Installing A Single Rru - Huawei RRU3269 Installation Manual

RRU3269
Installation Guide

8.2 Installing the RRU on a Pole

One or more RRUs can be installed on a pole.

8.2.1 Installing a Single RRU

This section describes the procedure and precautions for installing a single RRU on a pole.
Prerequisites
Before you install an RRU on a pole secured on a tower, the RRU and its mounting kits are
hoisted onto the tower. For details, see 7.1 Hoisting an RRU onto a Tower.
The hoist clamp on the main bracket is secured properly.


Procedure
Step 1 Determine a position for installing the mounting kits.


Issue Draft B (2018-05-15)
Do not stand an RRU upright because the RF ports cannot support the weight of the RRU.
Place a foam pad or cardboard under an RRU to protect the RRU housing from damage
during the installation.
If the RRU is installed on a tower, determine a position for installing the mounting kits
according to the instructions in 3.5.1 Clearance for a Single RRU.
If the RRU is installed on the ground, determine a position for installing the mounting
kits according to Figure 8-3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the RRU
51