Installing The Rru On A Pole; Installing A Single Rru - Huawei RRU3268 Installation Manual

RRU3268
Installation Guide
(6) Hoist clamp on
the main bracket

8.2 Installing the RRU on a Pole

One or more RRUs can be installed on a pole.

8.2.1 Installing a Single RRU

This section describes the procedure and precautions for installing a single RRU on a pole.
Prerequisites
Before you install an RRU on a pole secured on a tower, the RRU and its mounting brackets
are hoisted onto the tower. For details, see
The hoist clamp on the main bracket is secured properly.
l Do not stand the RRU upright because the RF ports cannot support the weight of the RRU.
l Place a foam pad or cardboard under the RRU to protect the RRU housing from damage
Procedure
Step 1 Determine a position for installing the mounting brackets.
l
l
Issue 10 (2015-12-30)
(7) Main bracket
NOTICE
during the installation.
If the pole must be installed on a tower, determine a position for installing the mounting
brackets according to the instructions in
If the pole must be installed on the ground, determine a position for installing the
mounting brackets according to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(8) Inner hexagon (9) Pole installation
screw bracket
7.1 Hoisting an RRU onto a
3.5.1 Clearance for a Single
Figure 8-3.
8 Installing the RRU
(10) Auxiliary
bracket
Tower.
RRU.
50