Optional) Installing The Plastic Shells Of The Rru - Huawei RRU3269 Installation Manual

RRU3269
Installation Guide
6
(Optional) Installing the Plastic Shells of
This section describes the procedure for installing the plastic shells of the RRU.
Context
An RRU is equipped with a plastic shell only when necessary.
Procedure
Step 1 Use an M6 Phillips screwdriver to loosen the two screws on the metal sheet of the RRU and
remove the metal sheet, as shown in Figure 6-1.
Figure 6-1 Removing the metal sheet
(1) Screw
Issue Draft B (2018-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

6 (Optional) Installing the Plastic Shells of the RRU

(2) Metal sheet
the RRU
35