Opening The Cover Plate Of An Rru Cabling Cavity - Huawei RRU3269 Installation Manual

RRU3269
Installation Guide
Figure 9-22 Removing insulated protective tubes from the cord end terminals
Figure 9-23 Method for handling cord end terminals that are not in use
Step 5 Route the cables according to the instructions in 9.1 Cabling Requirements.
Step 6 Label the installed cables according to the instructions in Attaching an L-Shaped Label.
----End

9.9 Opening the Cover Plate of an RRU Cabling Cavity

This section describes the procedure for opening the cover plate of an RRU cabling cavity.
Procedure
Step 1 Wear ESD gloves.
Issue Draft B (2018-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing RRU Cables
111