Installing The Rru - Huawei RRU3942 Installation Manual

Hide thumbs Also See for RRU3942:

Table of Contents

RRU3942

Installation Guide

About This Chapter

This chapter describes the procedure for installing the RRU. The RRU can be installed on a pole,

U-steel, angle steel, or wall. The procedure for installing the RRU varies depending on

installation options.

l Do not stand the RRU upright because the load-bearing capacity of the RF ports at the RRU

l Place a foam pad or cardboard under an RRU to protect the RRU housing from damage

6.1 Mounting Kits for an RRU

This section describes the bracket assembly and the attachment plate for an RRU.

6.2 Installing the RRU on a Pole

One or more RRUs can be installed on a pole.

6.3 Installing the RRU on U-steel

This section describes the procedure for installing the RRU on U-steel and the precautions that

must be taken during the installation. The RRU installed on U-steel can be mounted to a tower

or placed on the ground. It is recommended that only one RRU be installed on U-steel.

6.4 Installing the RRU on Angle Steel

This section describes the procedure for installing the RRU on angle steel and the precautions

that must be taken during the installation. The RRU installed on angle steel can be mounted to

a tower or placed on the ground. It is recommended that only one RRU be installed on angle

steel.

6.5 Installing the RRU on a Wall

This section describes the procedure for installing the RRU on a wall and the precautions that

must be taken during the installation.

6.6 Hoisting an RRU onto a Tower

Issue ()

CAUTION

bottom is low.

during the installation.

Huawei Proprietary and Confidential

Installing the RRU

6 Installing the RRU

Table of Contents