Set Time; Mode; Set Autoswitch - VWR International DUO SAS 360 Contact Instruction Manual

'SET TIME'

From the UTILITY MODE select the 'SET TIME' function
This option is used to programme day, month, year and time of the day.
Press 'ENTER' and "▼" or "▲" arrows to change month
Press 'ENTER' and "▼" or "▲" arrows to change day
Press 'ENTER' and "▼" or "▲" arrows to change year
Press 'ENTER' and "▼" or "▲" arrows to change hours
Press 'ENTER' and "▼" or "▲" arrows to change minutes
Press 'ENTER' to confirm and exit.

'MODE'

From the UTILITY MODE select the 'MODE'.
This option is used to select the aspirating mode between SINGLE MODE and MULTIMODE.
Press 'ENTER' and "▼" or "▲" arrows to change between SINGLE MODE and MULTIMODE
Select the desired aspirating mode and press 'ENTER' to confirm and exit.
This setting will be stored in memory even after the instrument is switched off.

'SET AUTOSWITCH'

To save battery consumption the SAS automatically switches off after 4 minutes. The SET AUTOSWITCH option is
used to enable or disable the automatic switch-off.
From the UTILITY MODE select the 'SET AUTOSWITCH'
Press 'ENTER' and "▼" or "▲" arrows to change between the two options.
SET TIME
MM/DD/YY - HH:MM
MODE
MM/DD/YY - HH:MM
MULTI MODE
MM/DD/YY - HH:MM
SINGLE MODE
MM/DD/YY - HH:MM
SET AUTOSWITCH
MM/DD/YY - HH:MM
AUTOSWITCH ON
MM/DD/YY - HH:MM
16