Start With The Same Air Volume As The Previous Sample; Standard Mode - VWR International DUO SAS 360 Contact Instruction Manual

Suggested air volumes:
- Contaminated areas (communities, processing rooms, etc) 10 - 200 litres of air
- Normal areas (laboratory benches, houses, etc) 200 - 500 litres of air
- Sterile or high risk areas (cleanrooms, operating theatres, etc) 500 - 1000 litres of air.

Start with the same air volume as the previous sample

SAS SUPER ISOLATOR
Switch on the SAS using the 'ON/OFF' switch. You will then see the following display with the last aspirated volume
of air:
Push the 'START' button to start a sampling cycle with the displayed volume of air.
DUO SAS SUPER 360 - DUO SAS Isolator
Switch on the SAS using the 'ON/OFF' switch. You will then see the following display with the last aspirated volume
of air:
Select the desires head by using the "▲" or "▼" arrows and press 'ENTER', the main screen will be displayed
Push the 'START' button to start a sampling cycle with the displayed volume of air.

'STANDARD MODE'

The standard mode function allows the operator to select a sampling volume from a list of eight standard volumes.
Switch on the instrument and wait until the main screen is displayed:
Press the "▼" or "▲" arrows to reach the
START FOR XXX
MM/DD/YY - HH:MM
[ XX] → XXX
MM/DD/YY - HH:MM
SELECT HEAD
START FOR XXX
MM/DD/YY - HH:MM
[ XX] → XXX
MM/DD/YY - HH:MM
START FOR XXX
MM/DD/YY - HH:MM
STANDARD MODE
MM/DD/YY - HH:MM
11