Clear Record; Language; Identify; Sampling Site - VWR International DUO SAS 360 Contact Instruction Manual

'CLEAR RECORD'

This option is used to delete all the data memorised in the DISPLAY RECORD. Before starting this procedure,
please be certain that existing data is not required or that it has been downloaded.
From the UTILITY MODE select the 'CLEAR RECORD'.
Press 'ENTER' to delete all the stored data, the display will show the resetting status

'LANGUAGE'

Menu text can be selected choosing from different languages. From the UTILITY MODE select the 'LANGUAGE'.
Press 'ENTER' to list all the available languages,
Use the "▼" or "▲" arrows to select the desired language and press 'ENTER' to confirm.
There are six available languages:
English, French, Spanish, German, Portuguese and Italian.

'IDENTIFY'

This option is used to identify the operator. This should be changed if different operators use the sampler and
especially if the data is to be printed.
From the UTILITY MODE select the 'IDENTIFY'.
Press 'ENTER' to modify the identification code.
Select the desired character using the "▲" or "▼" arrows and confirm with 'ENTER'.
Select the next desired characters and confirm them by pressing 'ENTER'.
The selected values are stored in the memory and it will be kept also after the instrument has been switched off.

'SAMPLING SITE'

The site identification should be changed for samples taken at different sites especially if the results are to be
printed.
CLEAR RECORD
MM/DD/YY - HH:MM
RESETTING...
►►►►
LANGUAGE
MM/DD/YY - HH:MM
ENGLISH
IDENTIFY
MM/DD/YY - HH:MM
IDENTIFY
XXXX
18