Print; Display Record - VWR International DUO SAS 360 Contact Instruction Manual

Select the desired options and press 'ENTER' to confirm and exit.
This setting will be lost after the instrument is switched off.

'PRINT'

The SAS can be connected with a RS232 cable to the SAS printer (Cat. No. ZZ30PCDPT100-I-12) or to a Personal
Computer with the SAS software (Cat. No. 710-0975). This function is used to start the data transfer form the SAS
to an external device.
From UTILITY MODE select the 'PRINT'
Press 'ENTER' to start sending the data, the display will show:
For more information see the printer or software user manual.

'DISPLAY RECORD'

The last 99 samples are memorised in the file 'DISPLAY RECORD'. Each sample is identified in chronological
order and shows the date, time, operator, site and volume of air sampled.
From the UTILITY MODE select the 'DISPLAY RECORD'.
Press 'ENTER' to see the memorised values
The following parameters are recorded:
Progressive number; Month and Day; Time; Identification / Site; Sampling Volume; Option
If there is no data stored in memory the display will show
AUTOSWITCH OFF
MM/DD/YY - HH:MM
PRINT
MM/DD/YY - HH:MM
SENDING DATA
DISPLAY RECORD
MM/DD/YY - HH:MM
001 MM/DD HH:MM
ID. /SITE VOL. OP
* * * * * * * * * * * *
* * * * * * * * * * * *
17