Interface description
6.5 Digital inputs/outputs
Procedure:
1. Strip off 6 mm of cable insulation and, if necessary, press on a ferrule.
2. Wire the digital inputs of the interface for connection of the sensors.
3. Wire the digital outputs of the interface for connection of the actuators.
4. Insert the cable into the corresponding screw terminal.
References
More information about digital inputs/outputs can be found in: Function Manual, Basic
Functions, Section: "PLC for SINUMERIK 828D" (P4)
86
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3