Sitop Power Supply - Siemens PPU 26x.3 series Manual

Spare parts and accessories

9.2 SITOP power supply

9.2 SITOP power supply
Description
Figure 9-1
The 24 V power supply units from the SITOP range are optimized for industrial use and operate
on the switched-mode principle. Due to the precisely regulated output voltage, the devices are
even suitable for the connection of sensitive sensors. Different versions are available
depending on the output current and field of application. Some versions are listed in the table
below.
SITOP lite/smart does not require much space on the standard mounting rail. With its tolerant
overload response, even loads with a high inrush current can be smoothly switched on. If
required, 50% extra power is made available for 5 seconds.
Selection and ordering data
Description
Stabilized power supply SITOP lite 10 A
24 VDC, 1-phase
Stabilized power supply SITOP smart 10 A
24 VDC, 1-phase
Stabilized power supply PSU100S 20 A
24 VDC, 1-phase
Stabilized power supply PSU300S 10 A
24 VDC, 3-phase
Stabilized power supply PSU300S 20 A
24 VDC, 3-phase
Further information
You can find additional information on the Internet at SITOP power supply
support.automation.siemens.com/WW/view/de/10807212)
246
SITOP PSU100S
Article number
6EP1334-1LB00
6EP1334-2BA01
6EP1336-2BA10
6EP1434-2BA10
6EP1436-2BA10
(http://
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3