Table of Contents
Advertisement
OK
Function Confirm
F1、F2、F3、
Corresponding to the selected setting in the Options menu 1,2,3,4
F4
2. Connector
COM
VΩ
ADO102
Figure 2-1
Figure 2-1 CH1-CH2: Input connectors for waveform display, the left is CH1,
the right is CH2, "COM" and "VΩ" is used to connect the black and red pen.
Figure 2-2 CH1-CH4: used to display the input waveform connection. "COM"
and "VΩ" is used to connect the black and red pen.
3. Automatically set
ADO has an automatic setting function. According to the input signal,
automatically adjusting the voltage stall, time base, and triggering the best way
to form display.
"AUTO" for automatically setting.
● If there is more than one channel signal, the channel with the lowest
frequency signal as the trigger source.
● Found no signal, connect the channel 1 to a signal, press "AUTO" button. As
shown in figure 2-3:
CH2 CH1
VΩ
Figure 2-3
COM
CH4
CH3 CH2 CH1
ADO104
Figure 2-1
25
Advertisement
Table of Contents
