Jinhan ADO102 Manual page 41

specified operating temperature.
●If the operating temperature changes by more than 5 degrees, will have to be corrected,
unless labeled "typical" outside the specifications, all specifications are guaranteed.
●Oscilloscope must be within the factory calibration interval.
Technical Specifications
import
Input coupling
Input impedance
The maximum
input voltage
Probe
attenuation
Set the probe
attenuation
factor
Signal
acquisition
system
Sampling
Method
Memory depth
Acquisition
Mode
Vertical System
Vertical
Sensitivity
Vertical accuracy
Vertical
resolution
Bandwidth
Horizontal
Systems
Real-time
sampling rate
Horizontal scan
range
Trigger System
Mode
Type
Automatic
detection
Measurement
System
AC、DC
1MΩ 25pF
40V (probe X1); 400V (probe X10) can be measured 220V voltage;
(probe X100) 2000V voltage can be measured
1X、10X
1X、10X、100X
Real-time sampling, random sampling
4K
Sample, Peak Detect
10mV-5V (Probe 1X) 100mV-50V (probe 10X) (1,2.5,5 step)
+/-3%
8bit
10MHz
100 MSa/s
25nS/div-5S/div
Auto, Normal and Single
Rising edge trigger, falling edge trigger
Support (20Hz-10MHz)
38