Monitor Panel - Horizon Fitness MC-80 Manual

1-2 Machine Descriptions

1-2-3 Monitor Panel

Total Counter
(Only for MC-80a and MC-80c)
This counter shows total amount of
collated sets.
Memorizing Sheet Caliper Button
- Used to check and memorize sheet
caliper of sheet to be collated.
- When lamp in memorizing sheet
caliper button is flashing, incorrect
communication from tower to
tower may occur. Turn off main
power and check system switch
and system cable connection.
(Refer to Page 39 and 40.)
Module ON/OFF Button
Used to turn on/off module.
Jam Lamp
When jamming occurs on each
bin, this lamp comes on.
Miss Feed Lamp
When miss feed occurs on each
bin, this lamp comes on.
Double Feed Lamp
When double sheet feeding
occurs on each bin, this lamp
comes on.
Error Monitor 2
Error monitor 2 shows feeding
errors in second set from top
on receiving tray.
Error Monitor 1
Error monitor 1 shows feeding
errors in first set from top on
receiving tray.
Stop Button
Preset Mode Switch (Only for MC-80a and
MC-80c)
Used to select function of preset counter
Both Off : Continuous Collating
MC-80
a
COLLATOR
1 2 3 1 2 3
1
1
2
2
3
4
5
6
7
8
5
1. Before You Begin
: Tab Insertion Mode
: Preset Stop Mode
Preset Counter (Only for
MC-80a and MC-80c)
Detector Sensitivity Monitor
Button
Used to check detector sensi-
tivity on all bins.
Bin ON/OFF Button
Used to turn on/off each bin.
Detector Switch
Used to select brightness of
detector lamp.
OFF : for Normal Sheet
ON : for Dark Printed Sheet
Detector Lamp (Green)
Used to check dust on detec-
tor. When detector is contami-
nated with paper dust or pro-
jector lamp burned out, this
lamp goes off.
Inching Button
Used to operate feed roller,
transport belt and sucker
intermittently.