Preset Stop Mode - Horizon Fitness MC-80 Manual

2. Setting & Operation
2-7 Tab Insertion Mode & Preset Stop Mode
4.
Input number on preset counter.
- Input required numbers in preset counter
with input buttons, and depress reset
button to set number.
5.
Start collating.
- To start collating, follow operation proce-
dure in pages 16 to 18.

2-7-2 Preset Stop Mode

Collating can be stopped after predetermined
sets of collation by use of preset mode.
Preset stop Procedure
1.
Select preset stop mode.
- Select preset stop mode with preset mode
switch on monitor panel.
2.
Input number on preset counter.
- Input required number in preset counter
with input buttons and depress reset
button.
3.
Start collating.
- To start collating, follow operation proce-
dure in pages 14 to 16.
- Collation stops after predetermined sets of
collation.
Preset Counter
R 6 5
Reset Button
1 2 3
Preset Mode Switch
30
4 3 2 1
Input Button