Hand Marrying Operation (Hmu-80 : Option) - Horizon Fitness MC-80 Manual

2-4 Hand Marrying Operation (HMU-80 : Option)

NOTE
- Hand marrying operation requires optional
hand marrying unit. (HMU-80)
- Hand marrying unit can be attached at any
MC-80 modules.
1.
Install hand marrying unit. (HMU-80)
- Remove delivery roller when hand mar-
ring unit is installed on MC-80c or MC-
80a with CTK-80.
- Attach hand marrying unit on to conveyor
shaft.
- Connect cable from hand marrying unit to
receptacle of MC-80.
2.
Select hand marrying mode.
- Select hand marrying mode with selector
switch on hand marrying unit.
Upper : Hand married set will be delivered
on top of collated sets.
Lower : Hand married set will be delivered
first and collated sets will be
delivered on top of hand married
set.
Delivery Roller
CTK-80
Hand Marrying Unit (HMU-80)
Cable
OFF
21
2. Setting & Operation
Selector Switch
Upper
Lower