Operation Procedure - Horizon Fitness MC-80 Manual

2. Setting & Operation

2-2 Operation Procedure

1.
Turn on power switch on each module.
2.
Turn on module.
- Turn on module with module ON/OFF
button on each module.
3.
Select detector mode with detector
switch on monitor panel.
Lamp OFF : for Normal sheet
Lamp ON : for Dark Printed sheet
4.
Raise bin with start/bin-up button on
remote controller.
- All bins are raised and transport belts start
rotating.
5.
Memorize sheet caliper on each bin.
- Depress memorizing sheet caliper button
on monitor panel to check and memorize
sheet caliper on all bins.
NOTE
- When SPF-11/SPF-20 is connected, turn on
motor on SPF-11/SPF-20 before depressing
memory button.
- Press memory button from right side mod-
ule in case more than two modules are used.
Module ON/OFF Button
Start/Bin-Up Button
16
Power Switch
1 2 3
1
1
2
Detector Switch
Memorizing Sheet
Caliper Button