Remote Controller [2] - Horizon Fitness MC-80 Manual

1-2 Machine Descriptions

1-2-5 Remote Controller [2]

1 2 3 4 5
1 1 1 1 1
1 2 3 2 2 2 2 2
? ? ? ? ?
! ! ! ! !
Feeding Error Lamp
(1) Error lamp ! shows feeding errors in first set on receiving
tray.
(2) Error lamp " shows feeding error in second set from top
on receiving tray.
(3) Error lamp " flashes when three sets of collated sheets
transported at same time. (6 modules operation).
6
1
2 1 2 3 Operation Error Lamp
?
Operation error lamp comes on;
!
(1) when sheet is not existing on bin which is turned on,
(2) when all sheets are fed and collating stops,
(3) when bin is not raised,
(4) when memorizing sheet caliper has not been performed.
Right-side delivery Indicator
Indicate right-side delivery function is selected.
Right-side delivery Selector Button
Used to select right-side delivery mode on MC-80c or MC-
80a with C Tower Kit (CTK-80). This button can be used on
above two modules which installed at right end of system or
single tower with C Tower Kit (CTK-80).
Overlap Button
Four overlapping can be selected.
All ON
Dual Cover Feeding Lamps
Indicate dual cover feeding working bin.
Dual Cover Feeding Selector
Used to select dual cover feeding mode.
Maximum Overlap
Middle Overlap
Minimum Overlap
100 % Overlap
Upper cover feed bin works.
Lower cover feed bin works.
Dual cover feeding mode OFF.
7
1. Before You Begin