3. Maintenance
3-1 Cleaning
3-1-1 Detector Cleaning
Dust on detector may cause error detection or
detector malfunction. Clean detector with
supplied detector cleaning kit or brush.
How to use detector cleaning kit.
1.
Put hose of detector cleaning kit (refer to
page 42) on joint pipe of MC-80 module.
2.
Turn on pump with start/bin up button
on remote controller.
3.
Set air blower knob at maximum posi-
tion.
OFF
Max.
4.
Install cleaning kit nozzle into feeding
area in between upper guide and lower
guide and set it as shown in the right
drawings.
Joint Pipe
Upper Guide
Lower Guide
Detector
34
Air Blower Knob
Detector Cleaning Kit
Start/Bin-Up
Button
Cleaning
Kit Nozzle
Sucker Pipe
Cleaning Kit Nozzle
Sucker Pipe