Remote Controller [1] - Horizon Fitness MC-80 Manual

1. Before You Begin
1-2 Machine Descriptions

1-2-4 Remote Controller [1]

Preset Counter Lamp
When collating stops with preset counter, this lamp comes on.
Module Lamp
(1) When module(s) is (are) turned on, this lamp comes on.
(2) When stop button is depressed, this lamp flashes.
(3) When delivery sensor on 2nd, 3rd, 4th, 5th or 6th module
continues to detect sheets, this lamp flashes.
Receiving Tray Lamp
(1) When receiving tray becomes full, this lamp comes on.
(2) When jamming occurs on delivery unit, this lamp flashes.
(3) When delivery sensor is contaminated with paper dust or
alike, main motor won't start and this lamp flashes.
Hand Marrying Indicator
- When hand marrying function is selected, this lamp comes on.
- When sensor on hand marrying unit is covered with paper or
alike, this lamp flashes.
Overlap Indicator
Indicates overlap mode; minimum, middle, maximum or 100%.
Speed Indicator
Indicates collating speed (interval) in 13 steps.
Speed Button
Collating speed (interval) can be selected with those button.
Start/Bin Up Button
First Depression :
Second Depression :
Stop/Bin Down Button
First Depression :
Second Depression :
Double Cycle Lamps
Indicate double cycle working block.
Double Cycle Selector
Used to select double cycle mode.
First section feeds sheets.
Second section feeds sheets.
Double cycle mode OFF.
Transport belts start rotating, pump
starts and bins raise up.
Collating starts.
Collating stops.
Transport belts stop rotating, pump
stops and bins descend.
6
1 2 3 4 5 6
1 1 1 1 1 1
2 2 2 2 2 2
1 2 3 1 2 3
? ? ? ? ? ?
! ! ! ! ! !