Sucker Stopper And Valve Setting - Horizon Fitness MC-80 Manual

2-1 Setting Up MC-80

2-1-2 Sucker Stopper and Valve Setting

1.
Set sucker stoppers according to quality
and condition of sheets.
A: Sucker Stopper A
Turn all four sucker stopper A fully
clockwise to set them at DOWN
position when collating less than 130
gsm sheets. Turn fully counterclockwise to
set at UP position when collating more
than 130 gsm sheets.
NOTE
- Sucker stopper A can be used only UP or
DOWN position.
B: Sucker Stopper B
Use sucker stopper B when double sheet
feeding often happens with sucker
stopper A being UP position. Sucker
stopper B can be moved down to
provide gap between suckers and sheet
by tuning clockwise.
C: Sucker Stopper C
1. Turn sucker stopper C clockwise to
provide gap between suckers and sheet
when double sheet feeding often
happens even if sucker stopper A set at
DOWN position.
2. Turn sucker stopper C clockwise to
provide gap between suckers and sheet
when NCR paper is collated.
2.
Close or open suction valve.
- Close or open suction valve according to
sheet size.
Sucker Stopper C
Close position :
Open position :
13
2. Setting & Operation
Sucker Stopper B
Sucker Stopper A
Sucker Stopper A
Suction Valve