Alarm contact output changeover setting (3 of mode selector 2)
This setting can be used to select
the alarm output logic N.C. or N.O.
contact.
Output for external device setting (4 of mode selector 2)
This setting can be used to set the
output time of external output.
Short detection distance setting (5 of mode selector 2)
When the detection distance is
less than 20m(66'), set "ON".
■Description of LED operation
■Alarm LED operation
・
・
・
・
・
■Memory LED operation
・
・
・
→
→
→
→
→
→
→
→
Enable / Disable the anti-masking
function.
:
:
* Keep the setting OFF in 6 , 8 of mode selector 2 for operation.
⑧
7
(
)
Factory set