Top View; Side View - Takex PIR-T40NAM(W) Instruction Manual

■Near detection area
●Detecting near area
To disable the auxiliary zone after removing "Area masking
plate (x3)", replace them in the original positions.
In that case, remove the adhesive, and replace "Area masking
plate" in the positions of "F", "R" and "C", as indicated on the
adjacent diagram.
Each of the 3 "Area masking plates" are uniquely shaped so
make sure to replace them correctly before operation.
●Detecting area directly beneath the sensor
■Masking method of the detection area
●Detection area setting to less than 20m(66')

【Top view】

【Side view】

Installation
height
(3.0m)
■Precautions on the detection area setting
●Detection area range
① ④
④
④ ③ ②
8m 10m 12m 16m
(26' ) (33' ) (40' ) (53' )
【Top view】
③
①
④
②
①②③
①
Area masking sheet
Attach the area masking sheet in order (①→④) from
the longest part of the detection area,
detection distance.
●Detection area distance adjustment
④
Auxiliary detection zone
C
Aea masking
plate
F
R
and adjust the
Adhesive
③
①
④
②