Status Led; Usb Connector - ABB AC-AP Series User Manual

22 Control panel overview
Key shortcuts
The table below lists key shortcuts and combinations. Simultaneous key presses are
indicated by the plus sign (+).
Shortcut
+
+
+ ,
+
+ ,
+
or
+
+
(keep down)


Status LED

The control panel has a status LED that indicates if there are any faults or warnings
present. The table below shows the meaning of the LED indications.
Green, continuous
Green, flickering
Green, blinking
Red, continuous
Blue, blinking
Blue, flickering
For further information on fault and warning indications, see
warning messages


USB connector

The USB connector is used for connecting the control panel to a PC. When
connected, the control panel acts as an USB adapter for data transfer between the
PC tool and the drive. It is also possible to transfer data between the PC and the
control panel through the USB connection.
Available in... Effect
any view Save a screenshot. Up to fifteen images can be stored
in the control panel memory. For instructions on how to
transfer the images into a PC, see section
files between the control panel and a PC
any view Adjust backlight brightness.
any view Adjust display contrast.
Home view Adjust reference.
parameter edit Revert an editable parameter to its default value.
views
any view Show/hide parameter index and parameter group
numbers.
any view Return to Home view by pressing down the key until
Home view is shown.
The drive is functioning normally.
Data is transferred between the PC tool and drive through the USB
connection of the control panel.
There is an active warning in the drive.
There is an active fault in the drive.
Bluetooth interface is enabled.It is in discoverable mode and ready
for pairing.
Data is transfered through the Bluetooth interface of the control
panel.
(page 57).
Transferring
(page 66).
Identifying error and