IBM Storage Networking SAN128B-6 Installation, Service And User Manual page 102

Other
System component
Serial console port
Ethernet management port
USB port
LEDs
System component
System power LED
System status LED
Ethernet port link LED
Ethernet port activity LED
Serial console port LED
FC port status LED
Power supply status LEDs
Fan assembly status LED
Other
System component
Serial cable
RJ-45 to DB9 adapter
RJ-45 connector
Weight and physical dimensions
Empty weight refers to the device with two power supply and fan assemblies installed but no SFP+ or
QSFP transceivers.
Model Height
SAN128B-6 8.67 cm
switch
3.41 inches
82
SAN128B-6 Installation, Service, and User Guide
Description
One three-wire (Tx, Rx, Gnd) UART serial port
One 1000/100/10 Mbps Ethernet port
One external USB port
Description
One green system power status LED (lower) on the port side.
One bicolor (green/amber) system status LED (upper) on the port side.
One link LED to the left of the RJ45 connector on the port side. Glows green for 1000
Mbps and amber for 100/10 Mbps.
One activity LED to the right of the RJ45 connector on the port side.
The serial console port LEDs on the port side remain off at all times, even when a
cable is inserted and the link is active.
128 bicolor (green/amber) port status LEDs. One for each SFP+ port and four for each
QSFP port on the port side of the switch.
One green OK status LED on each power supply assembly on the nonport-side of the
switch.
One amber FAIL status LED on each power supply assembly on the nonport-side of
the switch.
One bicolor fan assembly status LED on each fan assembly on the nonport-side of the
switch.
Description
RJ-45 console cable
RJ-45 to DB9 for console cable
Uses an RJ-45 connector for the serial port
Width
44.00 cm
17.32 inches
Depth Weight (empty)
60.96 cm 19.05 kg
24.00 inches 42.00 lbs
(With 2 PSUs and
3 Fans)
Weight (fully
loaded)
21.31 kg
47.00 lb
(With all the
transceivers)