Keyboard; Bar Code Reader; Printer; Product Maintenance - Fluke IDA-5 Getting Started

IDA-5
Getting Started

Keyboard

It is recommended that a small footprint USB keyboard be
used with the Product. The keyboard is necessary to
record data about the infusion device under test.
The keyboard must not have an internal USB
hub (for example, no extra USB ports).

Bar Code Reader

A bar code reader can also be used to scan infusion
device data into the Product.

Printer

A printer that supports PCL-5 (or higher) printer-
command language can be used with the Product to print
test results and reports.
10
Note

Product Maintenance

The subsequent sections tell you how to maintain the
Product.

Clean the Product

 Warning
To prevent possible electrical shock, fire, or
personal injury:
•
Turn the Product off and remove the
mains power cord. Stop for two minutes
to let the power assemblies discharge
before you open the fuse door.
•
Do not operate the Product with covers
removed or the case open. Hazardous
voltage exposure is possible.
•
Disconnect the mains power cord before
you remove the Product covers.
•
Remove the input signals before you
clean the Product.
•
Use only specified replacement parts.
•
Use only specified replacement fuses.
•
Have an approved technician repair the
Product.