Fluke IDA-5 Getting Started page 14

IDA-5
Getting Started
 Caution
To prevent possible damage to the product
or to equipment under test:
•
Only qualified service personnel should
service the Product.
•
Only qualified technical personnel
should perform troubleshooting and
service procedures on internal
components.
•
Only use degassed de-ionized water with
the Product. Wetting agent may be
added.
•
Do not use high-viscosity fluids. Oils
(solvents, or strong chemicals) may also
damage or contaminate the Product.
•
Do not use "Bleach" sterilizing agents or
alcohols.
•
Do not rapidly switch the Product On or
Off, nor remove the line cord while
energized.
•
Remove internal water before shipping
or storing. Do not use compressed air to
clean out the Product.
4
•
Do not expose the Product to
temperature extremes. For proper
operation, ambient temperatures should
be from 15 °C to 30 °C (59 °F to 86 °F).
Performance may be adversely affected
if temperatures fluctuate above or below
this range. For Storage Temperature
limits, see the Specifications section.
•
Do not use the Product in close
proximity to sources of strong
electromagnetic radiation (e.g.,
unshielded intentional RF sources).
These sources may interfere with proper
operation.