Advertisement
Install the shortest carbon strip into the hole using
No.502 glue.
Assemble the metal cross with motor on the wood
motor mount using the 4 pcs M3 screws.
Install arm on servo and electrify all servos to make
sure the arm perpendicular to servo. Then install arm
screws.
Assemble motor on the metal cross using screws.
Assemble Quick rod adjuster and install it in hinge,
apply a little No.502 to the nuts.
Applying glue into the servo's hole on the wing using
hot glue sticks. Then put servo into the hole.
6
Advertisement
