Taurus Synergic Drive 300C - EWM Taurus Synergic drive 200C Operating Instructions Manual

5.5.1.2

Taurus Synergic drive 300C

Item Symbol Description
1
2
3
4
5
6
7
8
• Insert the central plug for the welding torch into the central connector and screw together with crown
nut.
• Insert the welding current plug on the combi torch into the "-" welding current connection socket and
lock by turning to the right.
• Lock connecting nipples of the cooling water tubes into the corresponding rapid-action closure
couplings:
Return line red to rapid-action closure coupling, red (coolant return) and
supply line blue to rapid-action closure coupling, blue (coolant supply).
Only torches with special functions (additional control lead):
• Depending on the type of torch used, insert the torch control lead plug into either the 7-pole
connection socket (digital) or the 19-pole connection socket and lock in place.
099-005211-EW501
23.08.2010
0
Welding torch
Welding torch hose package
Central connection for welding torch (Euro)
Integrated welding current, shielding gas and torch trigger
19-pole connection socket (analogue)
For connecting analogue accessory components (remote control, welding torch control
lead, etc.)
Rapid-action closure coupling (blue)
coolant supply
Rapid-action closure coupling (red)
coolant return
"-" welding current connection socket
• TIG welding:
Power source
Design and function
3
4
5
6
Figure 5-14
Welding current connection for welding torch
TIG welding
1
2
7
8
41