Alignment Kit - Siemens SITRANS SL Operating Instructions Manual

Installing
4.4 Alignment of SITRANS SL
4.4.1

Alignment kit

Note
The alignment kit is not part of the delivery. If you commission the analyzer yourself, you
need to order the alignment kit additionally.
The alignment kit is necessary to align SITRANS SL. It consists of:
● a light source
● an alignment tool consisting of
● an coarse alignment unit
● a lens hood
● an Allen key for the alignment of the sensors
● two wrenches to secure/release the clamp ring:
● a tube of lubricant for the threads to prevent them form getting stuck.
See also
Accessories (Page 193)
58
– aiming tool base
– fine aligning unit
– one for the clamp ring,
– one to prevent the adapter on the process interface to get loose when the clamp ring
is secured
①
Thread lubricant
②
Alignment tool
③
Hook wrenches
④
Light source
Figure 4-14 Alignment kit
⑤
4 Batteries LR 6 1.5 V
⑥
Allen key
⑦
Coarse alignment unit
⑧
Lens hood
Operating Instructions, 12/2010, A5E01132948-04
SITRANS SL