Sending/Receiving A Document In Polling Mode - Olivetti Jet-Lab 400 Instructions Manual

Until the display shows:
LINE MONITOR:OFF
Press | /} to view the other available option. "LINE
MONITOR:ON".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O REGULATE THE SPEAKER VOLUME
If the volume of the dialling tones and connection signals is
too low or too high, regulate it using the
The display shows:
TYPE NUMBER
To raise or lower the volume of the speaker.
T
O REGULATE THE BUZZER VOLUME
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
BUZZER VOL.:LOW
Press |/} to view the other available options: "BUZZER
VOL.:HIGH", "BUZZER VOL.:MED" and "BUZZER
VOL.:OFF". For exemple: "BUZZER VOL.:MED".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O REDUCE THE TRANSMISSION SPEED
The fax machine transmits regularly at a speed of 14400
bps (bits per second). A transmission speed of 9600 or
4800 bps is recommended on disturbed telephone lines.
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
Until the display shows:
Press |/} to view the other available values: "TX SPEED
9.6" or "TX SPEED 4.8". For exemple: "TX SPEED 9.6".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
S
key.
ENDING
MODE
F
IRST OF ALL
It is a transmission request that a fax machine makes to another fax
machine so that the latter sends the document requested automati-
cally.
There are two main characteristics of communication using the polling
method:
• the user who is to receive the document requests trans-
mission. In other words, a user may connect to another fax
machine and request it to send a document (specifically prepared)
to him, even when the user at the other end of the line is out.
• the transaction is paid for by the person who requested
transmission (that is, the user who receives the document) and
not the person whose fax machine sends the document.
T
O MAKE A TRANSMISSION REQUEST
Arrange with your correspondent the time at which you
intend to make the transmission request so that he has time
to put the document to be sent in his fax machine. Then set
up your fax machine to receive the document, by program-
ming the dialling mode to be used to call your correspond-
ent and the time at which you wish to receive the document.
Until the display shows:
The display shows:
To confirm the current time or overwrite with the new one,
for example "18:20" and then press the
shows:
Dial the correspondent's number using any of the available
methods: directly on the numeric keypad or using the one-
touch dialling keys or speed dialling codes.
VARIOUS SETTINGS
TX SPEED 14.4
/
RECEIVING A DOCUMENT IN POLLING
,
WHAT POLLING IS
(
POLLING RECEPTION
POLLING RX
TYPE TIME
HH:MM
TYPE NUMBER
NUM/TOUCH/SPEED
)
. The display
25