Table of Contents
Advertisement
Press |/} to view the other available values: "01" "03",
"04", "05", "06", "07" and "08". For exemple:"04".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O CHANGE THE RING VOLUME
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
RING VOLUME:HIGH
Press| /} to view the other available options: "RING
VOLUME:LOW", "RING VOLUME: MED" and "RING
VOLUME:OFF". For example: "RING VOLUME: MED".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O RECOGNIZE THE RING FREQUENCY
In some countries, local telephone companies offer the pos-
sibility of assigning the same telephone line two or
more numbers, corresponding to different users. When
an incoming call is received, a different ring frequency
will indicate which user is to answer the call.
This function is extremely useful in the home or small offices,
where the same telephone line is shared by more than one
person.
Your fax machine is capable of "learning" one of
these frequencies (see the procedure that follows). In
this way, when a call with the specific ring frequency is
received, the fax machine (in "PHONE/FAX RX" and "TAD/
FAX RX" reception modes) prepares exclusively to re-
ceive a document.
This function is particularly useful when associated
with silent reception in that the fax machine will only ring
if the call is coming from a telephone.
If the fax machine is connected to an external answering
machine, we recommend you disconnect it before acti-
vating the recognition procedure.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
Until the display shows:
ENHANCED FEATUR.
Until the display shows:
DISTINC.RING:OFF
Press the |/} keys until the display shows:
CHANGE PATTERN
To confirm your choice. The display shows:
AUTODETECT. RING
Call the fax machine with the desired frequency so that the
fax machine detects it. The display shows:
RING DETECTED
To return the fax machine to the initial stand-by mode.
n o t E
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At
this point, press the
key and repeat the procedure.
T
O CHANGE THE LENGTH OF THE ACOUSTIC SIGNAL
This function is only enabled in some countries.
When the fax machine is set up for automatic reception
with recognition of the type of call, it behaves as fol-
lows:
•
if it is being called by a fax machine, it will automatically
prepare to receive a document after the preset number of
rings
•
if it is being called by a telephone, it will emit an acoustic
signal for a time of 20 seconds, after which, if you still have
not lifted the handset, it will automatically prepare to receive
a document.
If you want, you can change the length of the acoustic signal
as follows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
Until the display shows:
FAX/TEL TIMER:20
Press |/} to view the other available values: "15", "30", or
"40". For exemple: "40".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
23
Advertisement
Table of Contents
