Table of Contents
Advertisement
T
O SEND A DOCUMENT
Place the document in the ADF. The display shows the
default contrast and resolution values: NORMAL and
(standard), respectively.
If you want, change the contrast and resolution values as
described previously.
On the numeric keypad type the number of the correspond-
ent to whom you want to send the document (max. 64
digits).
To start sending the document.
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
n o t e
If you have entered any incorrect digits: position the cursor,
using the |/} keys, to the incorrect digit and overwrite it with
the correct one; if you want to delete the number altogether,
press the
key.
n o t e
If you want you can dial the correspondent's number using
the quick dialling procedures, see "To set one-touch and
speed dialling", "To send a document with one-touch
dialling" and "To send a document with speed dial-
ling".
n o t e
If you want to abort the transmission in progress, press
the
key. The fax machine unloads the document from
the ADF and returns to the initial stand-by mode.
If the document to be removed consists of more than one
sheet, before pressing
the others by hand.
T
O HEAR THE DIALLING TONE WHEN SENDING A DOCUMENT
Place the document in the ADF. The display shows the
default contrast and resolution values: NORMAL and
(standard), respectively.
If you want, change the contrast and resolution values as
described previously.
To hear the dialling tones.
On the numeric keypad type the number of the correspond-
ent to whom you want to send the document (max. 64
digits).
As soon as you hear the tone of your correspondent's fax
machine, press
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
10
to unload the first, remove all
to start sending the document.
T
O SEND A DOCUMENT WITH THE RECEIVER RAISED
Place the document in the ADF. The display shows the
default contrast and resolution values: NORMAL and
(standard), respectively.
If you want, change the contrast and resolution values as
described previously.
Lift the receiver to engage the line. The display shows:
TEL CALL
On the numeric keypad type the number of the correspond-
ent to whom you want to send the document (max. 64
digits).
If your correspondent's fax machine is set up for auto-
matic reception, you will hear the fax machine signal.
If it is set up for manual reception, the correspondent
himself will answer so you can ask him to press the start
key on his fax machine, after which you will hear the fax
machine signal.
To start sending.
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
A
UTOMATIC REDIAL
If no connection is established due to line errors or because the
correspondent's number is busy, the fax machine automatically
redials the number up to three times.
T
O DIAL A FREQUENTLY USED CODE AUTOMATICALLY
The fax machine will allow you to store a frequently used
code such as an area code or a code for access to an
alternative telephone operator.
Until the display shows:
INSTALLATION
Until the display shows:
OTHER CARR.:ON
The display shows:
ENTER NAME:
Enter the name that identifies the area of the code or the
name of the alternative telephone operator and then press
the
key or confirm the one set by pressing the
key directly. The display shows:
TYPE PREFIX:
(0 - 9):
Enter the new code (max. 6 digits) and then press the
key or confirm the one set by pressing the
The display shows:
ENTER ACRONYM
(A - Z):
key directly.
Advertisement
Table of Contents
