Olivetti Jet-Lab 400 Instructions Manual page 24

H
OW TO READ THE REPORTS
•
Act. N. Progressive number of the transactions
(transmission/reception) carried out.
•
Type Type of transaction:
TX, TX POLLING for transmission
RX, RX POLLING for reception.
•
Dialled Number Fax number of the correspondent that you
selected.
•
Name Name of the correspondent you called.
Only displayed if you have saved it on the
one-touch dialling keys or in the speed
dialling codes. This field is not printed on
the activity report.
•
Received Id Number (and, sometimes, name) of
theselected correspondent. This number
corresponds to the number you dialled,
only if the correspondent set his own fax
number correctly. Otherwise, it may be
different or not be present at all.
•
Date/Time Date and time at which the transaction was
carried out.
•
Duration Length of transaction (in minutes and sec-
onds).
•
Pages Total number of pages sent/received.
•
Result Result of the transaction:
- OK: if the transaction was completed suc-
cessfully
- ERROR CODE XX: if the transaction was
not completed due to the cause indicated
by the error code (see "Error codes",
chapter "Troubleshooting guide").
T /
O ENABLE DISABLE THE AUTOMATIC PRINTING OF THE
TRANSMISSION AND FAILED TRANSMISSION REPORT
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
FAILED TX REPORT
Press the |/} keys to view the other available options: "TX
REPORT:ALWAYS" and "TX REPORT: OFF".
FAILED TX REPORT - the fax machine will automatically
print a report only after each failed transmission.
TX REPORT:ALWAYS - the fax machine will automatically
print a report after each transmission irrespective of the
result.
16
TX REPORT: OFF - the fax machine will not print any
report.
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T /
O ENABLE DISABLE THE AUTOMATIC PRINTING OF THE
BROADCAST TRANSMISSION REPORT
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
BROADC. REP.:ON
Press |/} to view the other available option: "BROADC.
REP.:OFF".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T /
O ENABLE DISABLE THE AUTOMATIC PRINTING OF THE
BROADCAST TRANSMISSION DATA
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
DELAY LIST: ON
Press |/} to view the other available option: "DELAY LIST:
OFF".
To confirm your choice.
To return the fax machine to the initial stand-by mode.