Olivetti Jet-Lab 400 Instructions Manual page 19

Enter the acronym to be used to identify the code on the
display (1 character) and then press the
firm the one set by pressing the
To return the fax machine to the initial stand-by mode.
n o t e
Automatic code dialling is activated by pressing the
before dialling the correspondent's number.
If the fax machine is connected to a private line (PBX), the
key is to be pressed twice before dialling the correspondent's
number.
T
O SEND A DOCUMENT AT A PRESET TIME
)
TRANSMISSION
This function enables you to solve time zone problems if
your correspondent is located thousands of kilometres away
and to avoid paying high prices by choosing time bands
when there is less traffic on the telephone lines.
Place the document in the ADF. The display shows the
default contrast and resolution values: NORMAL and
(standard), respectively.
If you want, change the contrast and resolution values as
described previously.
Until the display shows:
DELAYED TX
The display shows:
TYPE TIME
HH:MM
Enter the time at which you want to send the document. For
exemple "16:50".
The display shows:
TYPE NUMBER
NUM/TOUCH/SPEED
Dial your correspondent's number in any of the available
methods: directly on the numeric keypad or using the one-
touch keys or speed dialling codes (see "To set one-touch
and speed dialling").
To confirm the setting. The display shows:
AUTOMATIC RX
TX AT
n o t e
You can delete the "broadcast transmission" setting by re-
moving the document from the ADF or pressing the
key.
key or con-
directly.
key
(
BROADCAST
16:50
T /
O CHANGE DELETE A BROADCAST TRANSMISSION THAT IS
ALREADY SET
Until the display shows:
DELAYED TX
The display shows:
CHANGE PARAM.?
The display shows:
CHANGE PARAM.?
If you want to delete the transmission set, press the
|/} keys: the display shows the message "CANCEL SET-
TING?", then press
machine automatically returns to the initial stand-by mode.
If you want to change the time at which the document is to be
sent or the number of the correspondent to whom you want
to send the document, take the following steps:
The display shows:
TYPE TIME
16:50
Overwrite with the new time and then confirm the setting by
pressing the key or confirm the existing time by pressing
the key. The display shows:
TYPE NUMBER
If you want to restore the current time, press the
the key straight away.
Overwrite with the new number and confirm the setting by
pressing the key or confirm the existing one by press-
ing the key straight away. The display shows:
AUTOMATIC RX
TX AT
to confirm deletion. The fax
, key,
18:00
11