Getting Started; Initial Set Up - CareFusion Alaris VP Plus Guardrails Directions For Use Manual

Getting Started

Before operating the Pump read this Directions For Use (DFU) manual carefully.
A

Initial Set Up

1 . Check that the Pump is complete, undamaged and that the voltage rating specified on the label is compatible with your AC power
supply .
2 . Items supplied are :
• Alaris VP Plus Guardrails Volumetric Pump
• Directions For Use (CD)
• AC Power Cable (as requested)
• Protective Packaging
3 . Connect the Pump to the AC power supply for at least 2½ hours to ensure that the internal battery is charged, verify that the
lit .
• A default data set is already installed in the Pump. The Alaris Editor software can be used to create an approved
A
data set that can be uploaded into the Pump.
• The Pump will automatically operate from its internal battery if the Pump is switched on without being connected
to the power supply.
• Should the Pump fail to perform correctly, replace it in its original protective packaging, where possible and
contact qualified service personnel for investigation.
1000DF00660 Issue 9
Alaris™ VP Plus Guardrails™ Volumetric Pump
12/48
Getting Started
S
is