Getting Started - CareFusion Alaris CC Guardrails 80033UND1-G Directions For Use Manual

w
Before operating the pump read this Directions For Use manual carefully.
1. Check that the pump is complete, undamaged and that the voltage rating specified on the label is compatible with your AC power
supply.
2. Items supplied are:
Alaris® CC Guardrails® Syringe Pump
l
User Support CD (Directions For Use)
l
AC Power Cable (as requested)
l
Protective Packaging
l
3. Connect the pump to the AC power supply for at least 2½ hours to ensure that the internal battery is charged (verify that the S is
lit).
Language Selection
1. On initial start-up the pump will display the Select Language screen.
2. Select the required language from the list displayed using the
3. Press the OK softkey to confirm your selection.
An approved Guardrails® Safety Software Data Set must be uploaded to the Alaris® CC Guardrails® Syringe Pump
w
prior to use. Guardrails® Editor PC Software is available separately.
The pump will automatically operate from its internal battery if the pump is switched on without being connected
to the AC power supply.
Should the pump fail to perform correctly, replace in its original protective packaging, where possible and contact a
qualified service engineer for investigation.

Getting Started

Initial Set-up
f
1000DF00333 Issue 6
keys.
10/38