Pump Configuration Available Via The Alaris Editor Software; Data Set Configuration Settings; General Pump Configuration Settings - CareFusion Alaris VP Plus Guardrails Directions For Use Manual

Pump Configuration available via the Alaris Editor
Software
The following options are only configurable via the PC based Alaris Editor Software, see Alaris Editor help files for further details .

Data Set Configuration Settings

Profile Filtering
Unit Display

General Pump Configuration Settings

AC Fail Warning
Audio Volume
Audio Volume Adjustable
Auto Night Mode
Auto save
Battery Icon
Callback Time
Drug Override Mode
Event Log
Pressure Display
Quiet Mode
Rate Lock
Rate Titration
Standby Mode
VTBI Clear Rate
Weight Default
Weight Soft Min
Weight Soft Max
Controls whether the user is able to filter which profiles will be available on the Pump .
The text used to display units .
Controls whether, when main power has been disconnected, a warning is generated to inform
the user that the Pump is operating solely on battery power .
Controls the audio volume used for alarms, warnings and prompts .
Controls whether the user is able to adjust the audio volume setting .
Controls whether, between defined times, the Pump makes changes consistent with usage at
night, e .g . dimmed backlight .
Controls whether, when the Pump is powered down, the active infusion settings are preserved
for restoration at the next power-up .
Controls whether or not the battery icon, which indicates state of charge, is displayed .
Controls the time that is allowed to elapse between the user's last recorded interaction with the
Pump and generation of an ATTENTION prompt .
Always - Any changes made to the dose rate that are outside of the Guardrails Soft Alerts will
require confirmation before starting infusion .
Smart – Confirmation of setting will be required on first dose rate set outside of the Guardrails
Soft Alert . Any subsequent changes will not require confirmation until after the dose rate has
been confirmed inside the Guardrails Soft Alert limits .
Controls whether or not it is possible for the user to inspect the contents of the event log using
the Pump's display and keypad .
Option not available as Pressure Display is always enabled .
Controls whether or not the Pump operates in a mode whereby generation of sound is
minimised, by turning off the key clicks .
Controls whether the Rate Lock feature is available for use .
Allows the adjustment of the infusion rate while the Pump is infusing, without putting the
Pump on hold .
Controls whether or not standby mode is available on the Pump .
Controls whether or not the Pump forces the user to define a new rate following completion of
delivery of a previous VTBI .
Set the default patient weight .
Set the minimum patient weight for weight-based drug dosing calculations before alerting the
user .
Set the maximum patient weight for weight-based drug dosing calculations before alerting the
user .
1000DF00660 Issue 9
Alaris™ VP Plus Guardrails™ Volumetric Pump

Pump Configuration available via the Alaris Editor Software

26/48