Irda, Rs232 And Nursecall Specification; Irda/Rs232/Nursecall Feature; Rs232/Nursecall Connection Data; Irda - CareFusion Alaris VP Plus Guardrails Directions For Use Manual

IrDA, RS232 and Nursecall Specification

IrDA/RS232/Nursecall Feature

The IrDA/RS232/Nursecall is a feature that allows the Pump to be connected to an external device for the purpose of data
communication .
The nursecall interface provides a remote backup to the internal audible alarm. It should not be relied upon to
A
replace monitoring of the internal alarm.
Refer to the Technical Service Manual for further information regarding the RS232 interface.
The assessment for the suitability of any software used in the clinical environment to control receive data from the
Pump lies with the user of the equipment. This software should include detection of the disconnection or other
failure of the RS232 cable.
Any connected analogue and digital components are required to meet IEC/EN60950 for data processing and IEC/
EN60601 for medical devices. Anyone connecting additional devices to the signal input or output is a system
configurator and responsible for meeting the requirements of the system standard IEC/EN60601-1-1.
To connect to the RS232 port use spare part 1000SP01183 - RS232 cable.

RS232/Nursecall Connection Data

Nursecall Specification:
Connector
TXD/RXD
Baud Rate
Start Bits
Data Bits
Parity
Stop Bits
Nurse Call Relay Contacts
Typical Connection Data:
1 . Nursecall (Relay) Normally Closed
2 . Transmit Data (TXD) Output
3 . Received Data (RXD) Input
4 . DTR ª DSR (6)
5 . Ground (GND)
6 . DSR ª DTR (4)
7 . Not used
8 . Nursecall (Relay) Normally Open
9 . Nursecall (Relay) Common

IrDA

Baud Rate 115k Baud
Start Bits
1 Start Bit
Data Bits
8 Data Bits
Parity
No Parity
Stop Bits
1 Stop Bit
D Type - 9 Pin
EIA RS232-C Standard
115k Baud
1 Start Bit
8 Data Bits
No Parity
1 Stop Bit
Pins 1, 8 + 9, 30V dc, 1A rating
1000DF00660 Issue 9
Alaris™ VP Plus Guardrails™ Volumetric Pump
IrDA, RS232 and Nursecall Specification
44/48