Klarstein 10030663 Manual page 34

Cleaning beer tap mechanism
Beer cooler need conformity with hygienically demand, it need clean before the first use or for long time use,
clean the whole machine with dry cloth. Otherwise two cleaning way is recommended as following:
1. Load the warm water into the cleaning kit.
2. And connect the end of piercing pin, press the water into the pin to clean the pin tube, and push the
water out from the beer tube at the other end. And repeat this cleaning work till the beer tube clean
(need 3 bottles warm water at least); please clean the beer tap mechanism as figure 30. Note: Please
disassemble the tap when make the cleaning.
Beer connector must connect with dispensing unit
Please open the faucet when you
are cleaning the beer tube
Never put the tap mechanism parts in the washing machine or dishwasher; Never use the chemical
cleaning detergent to clean the parts, warm or purified water is recommended.
This connector must connect with clean-
ing bottle
Dispensing unit
Cleaning bottle
34