Table of Contents
Advertisement
NXP Semiconductors
UM11152
User manual
Figure 3. Serial port settings in terminal program
• Supply power to the NXQ1TXH5DB1401 board and you see the message as indicated
in
Figure
4.
Figure 4. Message after power-up
• Place a receiver on the charging pad.
• Click in the black terminal screen and type "version" followed by pressing the Enter key.
The word "version" is not displayed on the screen when local echo is off.
Figure 5. Message after typing "version" (see
• Click in the black screen and type "log" followed by clicking Enter. The word "log" is not
displayed on the screen when local echo is off.
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 6 December 2018
NXQ1TXH5DB1355 plugin board
Section 4.1
for an explanation)
UM11152
© NXP B.V. 2018. All rights reserved.
7 / 15
Advertisement
Table of Contents
