Table of Contents
Advertisement
NXP Semiconductors
1
Introduction
UM11152
User manual
This document describes how to use the NXQ1TXH5DB1355 plugin board.
The NXQ1TXH5DB1355 board can be used in combination with the NXQ1TXH5DB1401
demo board or with a customer-specific design. The NXQ1TXH5DB1355 plugin board
contains a microcontroller, the LPC824M201JDH20. This microcontroller interfaces
2
between the I
C from the NXQ1TXH5 and the UART.
The NXQ1TXH5DB1355 can be used for the following tasks:
• Read out Qi operating phase (ping, power transfer, foreign object detected, fault state)
• Verifying parameter setup via configuration resistors
• Read out chip temperature, switching frequency
• Foreign power calibration
This information helps designers with the verification and testing of their NXQ1TXH5
application.
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 6 December 2018
UM11152
NXQ1TXH5DB1355 plugin board
© NXP B.V. 2018. All rights reserved.
3 / 15
Advertisement
Table of Contents
